Ningún producto
Estos precios se entienden IVA incluído
PFC12-CD0116-160400011
Nuevo
REGULADOR PFC12 144x144 380-415V
Fabricante ITALFARAD |
Este producto ya no se encuentra disponible
Advertencia: ¡Últimas unidades en stock!
Fecha de disponibilidad:
REGULADOR PFC12 144x144 380-415V
The new Italfarad PFC12 Power Factor Correction electronic regulator, fully controlled by microprocessor, incorporates a lot of innovative features when compared to the previous regulator designs, in particular the temperature control and a serial interface RS232. The interface RS232 allows the set-up of the regulator by computer, as well as by the push-buttons, and to check the operating parameters on a computer. It is also possible to verify the level of functioning of the automatic PFC equipment by means of special software. The PFC12 regulator allows automatic set-up, without the need to set the capacity, the CT direction and the power of the first bank, if the power of the banks is a multiple of the first (binary system), i.e. 1 - 2 - 4 - 8 -16. Once the regulator is set, it is possible to block the push-buttons to prevent manual adjustment of the operating parameters and settings. |
|
Technical Characteristics |
|
Supply and Measurement Voltage |
380 ÷ 415 Vac -15% +10% |
Rated Frequency |
50/60 Hz |
Maximum Power Consumption |
5,0 VA |
Time of Immunity to Micro-breakings |
< 30 mS |
Rated Supply Current |
5 A from C.T. (1 A on request) |
Supply Current Working Limits |
0,125 ÷ 6,0 A |
Voltage and Current Readings |
Real rms |
Power Factor Setting |
0.80 lag – 0.80 lead |
Switching Step Delay |
5÷240 Seconds |
Controlled Banks |
12 ( 11 N/O + 1 C/O ) |
Alarm Relay |
1 |
Contacts Capacity |
5 A |
LED Signals |
Main Inductive Load Capacitive Load Switched Banks |
Working Temperature |
-20°C +60°C |
Storage Temperature |
-30°C +80°C |
RS232 Serial Exit |
Yes |
Temperature Control |
Yes |
Connections |
Removable Terminal Block |
Dimensions |
144 x 144 x 62 mm |
Cut-out Dimensions |
138,5 x 138,5 mm |
Protection Degree |
IP41 without cover |
Weight | 770 g |
Applicable Standards | CEI EN 61010-1 CEI EN 50081-2 CEI EN 50082-2 |
REGULADOR PFC12 144x144 380-415V
The new Italfarad PFC12 Power Factor Correction electronic regulator, fully controlled by microprocessor, incorporates a lot of innovative features when compared to the previous regulator designs, in particular the temperature control and a serial interface RS232. The interface RS232 allows the set-up of the regulator by computer, as well as by the push-buttons, and to check the operating parameters on a computer. It is also possible to verify the level of functioning of the automatic PFC equipment by means of special software. The PFC12 regulator allows automatic set-up, without the need to set the capacity, the CT direction and the power of the first bank, if the power of the banks is a multiple of the first (binary system), i.e. 1 - 2 - 4 - 8 -16. Once the regulator is set, it is possible to block the push-buttons to prevent manual adjustment of the operating parameters and settings. |
|
Technical Characteristics |
|
Supply and Measurement Voltage |
380 ÷ 415 Vac -15% +10% |
Rated Frequency |
50/60 Hz |
Maximum Power Consumption |
5,0 VA |
Time of Immunity to Micro-breakings |
< 30 mS |
Rated Supply Current |
5 A from C.T. (1 A on request) |
Supply Current Working Limits |
0,125 ÷ 6,0 A |
Voltage and Current Readings |
Real rms |
Power Factor Setting |
0.80 lag – 0.80 lead |
Switching Step Delay |
5÷240 Seconds |
Controlled Banks |
12 ( 11 N/O + 1 C/O ) |
Alarm Relay |
1 |
Contacts Capacity |
5 A |
LED Signals |
Main Inductive Load Capacitive Load Switched Banks |
Working Temperature |
-20°C +60°C |
Storage Temperature |
-30°C +80°C |
RS232 Serial Exit |
Yes |
Temperature Control |
Yes |
Connections |
Removable Terminal Block |
Dimensions |
144 x 144 x 62 mm |
Cut-out Dimensions |
138,5 x 138,5 mm |
Protection Degree |
IP41 without cover |
Weight | 770 g |
Applicable Standards | CEI EN 61010-1 CEI EN 50081-2 CEI EN 50082-2 |
Productos más vistos
REGULADOR PFC12 144x144 380-415V
SM120V LED37S/840 PSU W60L60....