REGULADOR PFCS12 144x144 380-415V

•   Automatic Power Factor Correction  regulator, fully controlled by microprocessor.
•    Three-phase Voltage measurement input, separated by the feed input.
•    2 serial interfaces (1 RS232 port and 1 RS485 port ) for set-up,  remote control, checking and automatic test by means of a PC.
•    Internal temperature.sensor
•    Programmable input for sensing outdoor temperature (NTC) or for digital input.
•    Data watch equipped with events counter.
•    Advanced functions (measurement of capacitor current overload, FFT (harmonic spectrum) on current and voltage up to 31st harmonic, weekly Power Factor Correction average, storage of the max. values and storage of harmonic events).
•    2 programmable relays as alarm and/or ventilation control.

Technical Characteristics

 Supply and Measurement Voltage

 110÷127 Vac / 220÷240 Vac  -15%+10%

 Rated Frequency

 50 or 60 Hz

 Maximum Power Consumption

 9,7 VA

 Time of Immunity to Micro-breakings

 < 45 mS

 Rated Supply Current

 5 A from C.T. (1 A on request)

 Supply Current Working Limits

 0,125 ÷ 6,0 A

 Voltage and Current Readings

 Real rms

 Power Factor Setting

 Switching Step Delay

 5÷240 Seconds

 Controlled Banks

 12 ( 11 N/O + 1 C/O )

 Alarm Relay

 1

 Contacts Capacity

 5 A

 LED Signals

 Main

 Inductive Load

 Capacitive Load

 Switched Banks

 Working Temperature

 -20°C +60°C

 Storage Temperature

 -30°C +80°C

 RS232 Serial Exit

 Yes (with baud-rate  1200...38400 bps)

 Temperature Control

 Yes (with baud-rate  1200...38400 bps)

 Connections

 Removable Terminal Block

 Dimensions

 144 x 144 x 62 mm

 Cut-out Dimensions

 138,5 x 138,5 mm

 Protection Degree